 |
 MULTI LAYER BLOWN FILM PLANT
Further KONARK also offers 2 layer to 5 layer co-extrusion plants in screw diameter range of 40 mm, 50 mm and 65 mm as per the customer's requirements. Plants are ideally suitable for LDPE/LLDPE/HDPE/EVA etc. for making milk pouch, Ghee pouch, lamination films and Stretch clean film etc.
Features:
-
Helical Gearbox
-
Groove feed barrel
-
Consistent and high productivity
-
Easy change over
-
Higher output compared to similar parts Oscillating Hauloff
-
AC motor with AC frequency drive with synchronized system
-
Calibrating cage
SR. NO. |
1 |
2 |
3 |
4 |
5 |
6 |
PLANT MODEL |
Two Layer |
Two Layer |
Two Layer |
Three layer |
Three layer |
Three layer |
SCREW SIZE (MM) |
65 -- 45 |
40 -- 40 |
40 – 40 |
51 – 51 -- 51 |
51 – 55 -- 51 |
65 – 65 -- 65 |
SCREW L/D RATIO |
30 |
30 |
30 |
32 |
32 |
32 |
FEED SECTION TYPE |
Smooth Feed |
Smooth Feed |
Groove Feed |
Groove Feed |
Groove Feed |
Groove Feed |
MAX LAYFLAT WIDTH (MM) |
1200 |
600 |
700 |
1250 |
1250 |
1600 |
THICKNESS RANGE (MICRON) |
25 to 100 |
25 to 100 |
25 to 100 |
20 to 100 |
20 to 100 |
20 to 100 |
MAX PRODUCTION CAPACITY(KGS PER HOUR) |
70 |
40 |
60 |
190 |
180 |
250 |
TOTAL CONNECTED LOAD (KW) |
85.5 |
|
58.5 |
146 |
152.5 |
175 |
MAIN DRIVE (KW) |
20 / 10 |
15 |
|
30/33/30 |
30/40/30 |
25 / 25 / 25 |
POLYMER TO BE PROCESSED |
HDPE / LDPE / LLDPE |
DOLCI KONARK EXTRUSION
KONARK now is bringing into india, the pioneers in extrusion technology from Italy,
Dolci Extrusion SRL.
The partnership shall manufacture high output world technology machines for Multi layer Blown Films and Cast lines.
The product shall be offered with multi split co-extrusion heads stationary type with IBC in the 3,4,5 and 7 layer versions.
SR. NO. |
1 |
2 |
3 |
4 |
5 |
PLANT MODEL |
Three Layer |
Three Layer |
Three Layer |
Three Layer |
Five Layer |
SCREW SIZE (MM) |
55 - 65 - 55 |
55 - 65 - 55 |
65 - 65 - 65 |
65 - 75 - 65 |
55 – 55 - 65 - 55 - 55 |
SCREW L/D RATIO |
30 |
30 |
30 |
30 |
30 |
FEED SECTION TYPE |
Groove Feed |
Groove Feed |
Groove Feed |
Groove Feed |
Groove Feed |
MAX LAYFLAT WIDTH (MM) |
1600 |
1600 |
2000 |
2000 |
1300 |
THICKNESS RANGE (MICRON) |
20 to 180 |
20 to 180 |
20 to 180 |
20 to 180 |
20 to 180 |
MAX PRODUCTION CAPACITY(KGS PER HOUR) |
250 – With out IBC |
300 – With IBC |
350 – With IBC |
400 – With IBC |
200 – With IBC |
TOTAL CONNECTED LOAD (KW) |
310 Kw |
310 Kw |
|
|
|
MAIN DRIVE (KW) |
57 / 75 / 57 |
57 / 75 / 57 |
75 / 75 / 75 |
75 / 117 / 75 |
57 / 57 / 57 / 74 / 57 / 57 |
POLYMER TO BE PROCESSED |
HDPE / LDPE / LLDPE / NYLON |
| |
|
|
|
| |
© Copyright 2006. All rights reserved Konark Plastomech Pvt. Ltd
Web Design and Search Engine Optimization by Opal Infotech |
